Hydroponic Plumbings & Fittings - HydroLand – Page 2

0

Your cart is empty

Continue shopping

66 products

duotight - 8mm (5/16”) OD Retaining Circlip (10 Pack)

duotight - 8mm (5/16”) OD Retaining Circlip (10 Pack)

$1.00

1/2 Inch Type A Camlock - Male Cam x Female BSPP Thread - KegLand

1/2 Inch Type A Camlock - Male Cam x Female BSPP Thread

$3.30

The silicone rubber in these washers is high temperature suitable for temperatures up to 250°C and higher.

This is made from food grade silicone and will not perish like some other rubber washers.

Flat Silicone 1/2 Inch BSP Washer - 21mm ID x 31mm OD x 2mm thick

$0.99

A stainless steel pipe fitting with a threaded female connection on one end and a smooth female outlet on the other, featuring an embossed '304' marking on its side.

3/8 to 1/4 304 Stainless Reducing Socket (BSP)

$2.25

When not connected to another JoinTech Connector this will not allow any flow. Incredibly useful on Pump or Hydroponic systems.

When not connected to another JoinTech Connector this will not allow any flow. Incredibly useful on Pump or Hydroponic systems.

JoinTech Female Connector with Auto Shut Off x 1/2 Inch BSPT Male

$9.95

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

duotight - 8mm (5/16”) Female x 9.5mm (3/8”) Female Reducer

$3.95

duotight - 6.3mm (1/4”) Female x 6.3mm (1/4”) Female One Way Check Valve (Gas/Water)

duotight - 6.3mm (1/4”) Female x 6.3mm (1/4”) Female One Way Check Valve (Gas/Water)

duotight - 6.3mm (1/4”) Female x 6.3mm (1/4”) Female One Way Check Valve (Gas/Water)

$3.95

Gray plumbing fitting with 'duotight' branding on a white background

Gray plumbing fitting with 'duotight' branding on a white background

duotight - 8mm (5/16)Female - X Cross Adaptor / Splitter

$4.95

Gen2 duotight elbow in 9.5mm x 9.5mm

duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Female Elbow

$3.95

One side is a standard 8mm (5/16) duotight push in fitting, where the other side is a compression adapted duotight (Screw Lock)

One side is a standard 8mm (5/16) duotight push in fitting, where the other side is a compression adapted duotight (Screw Lock)

duotight - 8mm (5/16) Screwlock x 8mm (5/16) Elbow

$3.45

The perfect fitting for bending around tight corners, the 8mm duotight elbow uses two o-rings for superior performance and reliability.

The perfect fitting for bending around tight corners, the 8mm duotight elbow uses two o-rings for superior performance and reliability.

duotight - 8mm (5/16”) Female x 8mm (5/16”) Male Elbow

$3.95

This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.

Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand

Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long

$1.95

duotight - 8mm (5/16') Plug - KegLand

duotight - 8mm (5/16') Plug - KegLand

duotight - 8mm (5/16') Plug

$0.99

White plastic elbow fitting on a white background

monotight – 6.35mm (¼') Female x 6.35mm (¼') Female Push In Elbow

$3.95

The secret to our superior sealing performance is not just the fact that we use high quality EPDM and a Silicone O-Ring.

The secret to our superior sealing performance is not just the fact that we use high quality EPDM and a Silicone O-Ring.

duotight - 6.35mm (1/4') Female x 8mm (5/16') Female Reducer

$3.95

Rigid Plastic Joiner 4mm (5/32) ID x 6.35mm (1/4) OD x 50mm Long

Rigid Plastic Joiner 4mm (5/32) ID x 6.35mm (1/4) OD x 50mm Long - KegLand

Rigid Plastic Joiner 4mm (5/32) ID x 6.35mm (1/4) OD x 50mm Long

$1.95

HYDROPONIC SYSTEMS

PLUMBING & FITTINGS

PH & EC READERS